Gemma Sangwine

Unique and bespoke millinery and hair accessories


2 Comments

Wiring together a Vintage Diamante Side Tiara

I have been making these side tiaras for a while now, but it all started in 2013 in response to an enquiry from a bride-to-be….montage

Paula loved vintage marcasite brooches and wanted a statement bridal headpiece made from them. I experimented with different techniques and ended up using silver plated wire to bind all the pieces together and fix them onto a blonde coloured headband.

Since then I have made many more of these headpieces (and learnt that they are called side tiaras!) and I have refined the way that I make them.

Here I will take you through the process I use to make a wire frame to hold the pieces of vintage jewellery together.

To start, bring together the jewellery you want to use and decide on the layout and composition. Think carefully about the size, weight and balance of the piece. At this stage I usually have lots of brooches and earrings piled up and I try out different compositions and different pieces, taking a photo of each one on my phone, and then scrolling through the photos to see which looks best.

JpegHere I have settled on a design made with 4 brooches and a pair of earrings, all gold tone with red diamante. Next I take some 1.0 gold plated wire and make a frame which will be the main structure that the jewellery will be wired onto.

Jpeg

JpegThe jewellery will sit on top of the frame, but check that it will be as hidden as possible and that each piece of jewellery can be securely wired onto it – hence the little wings on either side for the earrings to attach to.

I have used 0.4 wire to bind the ends of the frame where they overlap.

Next take a length of about 40cm of 0.2 wire and thread it through a needle, use it doubled over and knot it at the end. The 0.2 wire is fine enough to sew with and strong enough to hold the jewellery in place. Cast it onto the frame and sew on the first piece of jewellery. I usually start with the last brooch at the bottom. You can also keep the clasps intact and use them to help secure the brooches to the frame. Use the needle to bring the wire up through the small gaps in the brooch and back down to catch onto the frame. At this stage I should point out that this technique only works with jewellery that has gaps between the diamante stones for you to sew through, some pieces are totally solid and are only good for glueing onto feather or fabric bases.

Once all the jewellery is securely fixed to the frame, go round with teflon pliers to make sure all ends of the 0.2 wire, where you have cast it on, are smoothed over.

Now you can fix the diamante onto a headband. I prefer to use ribbon covered bands in a colour to match the client’s hair colour, then they disappear in the hair and all you see is the diamante.

Model -Stephanie Hazel Poole •  Photography- Kayleigh Adams Photography

This is a great way of recycling vintage jewellery, especially odd earrings and brooches which have broken clasps. You can also incorporate heirloom jewellery and pieces of sentimental value.